Registering to CEC
Broadcast (F): osd name set to 'Broadcast'
Found CEC adapter: RPI
connection opened
unregistering all CEC clients
Open - vc_cec initialised
logical address changed to Free use (e)
connection opened
<< Broadcast (F) -> TV (0): POLL
initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
<< e0
processor thread started
>> POLL sent
TV (0): device status changed into 'present'
<< requesting vendor ID of 'TV' (0)
<< e0:8c
>> 0f:87:00:00:f0
Command: >> 0f:87:00:00:f0
TV (0): vendor = Samsung (0000f0)
expected response received (87: device vendor id)
replacing the command handler for device 'TV' (0)
registering new CEC client - v4.0.2
detecting logical address for type 'recording device'
trying logical address 'Recorder 1'
<< Recorder 1 (1) -> Recorder 1 (1): POLL
<< 11
>> TV (0) -> Broadcast (F): device vendor id (87)
>> POLL sent
logical address 'Recorder 1' already taken
Recorder 1 (1): device status changed into 'present'
trying logical address 'Recorder 2'
<< Recorder 2 (2) -> Recorder 2 (2): POLL
<< 22
<< 22
>> POLL not sent
using logical address 'Recorder 2'
Recorder 2 (2): device status changed into 'handled by libCEC'
Recorder 2 (2): power status changed from 'unknown' to 'on'
Recorder 2 (2): vendor = Pulse Eight (001582)
Recorder 2 (2): CEC version 1.4
AllocateLogicalAddresses - device '0', type 'recording device', LA '2'
logical address changed to Recorder 2 (2)
Recorder 2 (2): osd name set to 'Kodi CEC'
Recorder 2 (2): menu language set to 'eng'
GetPhysicalAddress - physical address = 2000
AutodetectPhysicalAddress - autodetected physical address '2000'
Recorder 2 (2): physical address changed from ffff to 2000
<< Recorder 2 (2) -> broadcast (F): physical address 2000
<< 2f:84:20:00:01
CEC client registered: libCEC version = 4.0.2, client version = 4.0.2, firmware version = 1, logical address(es) = Recorder 2 (2) , physical address: 2.0.0.0,  compiled on Wed Nov 22 02:33:34 UTC 2017 by root@compiler2 on Linux 4.9.0-3-amd64 (armv7l), features: P8_USB, DRM, P8_detect, RPi
<< Recorder 2 (2) -> TV (0): OSD name 'Kodi CEC'
<< 20:47:4b:6f:64:69:20:43:45:43
<< requesting power status of 'TV' (0)
<< 20:8f
CEC adapter opened
>> 02:90:00
Command: >> 02:90:00
TV (0): power status changed from 'unknown' to 'on'
expected response received (90: report power status)
>> TV (0) -> Recorder 2 (2): report power status (90)
unhandled response received: opcode=87 initiator=2 destination=f response=0